Talk to a Roofing Contract about Lightening Hitting Metal Roofs

If you purchased a home with a metal roof, you may be worried about lightening strikes. That is normal, as there are a lot of rumors and myths going around. The simplest way to unveil the truth is to talk to an experienced roofing contractor in Hillsborough, NC. Installers know a lot about the materials they use every day. Here are some of the comments you can expect when you ask them about the possibility of lightening striking your roof.

What Is Lightning?

Lightning is a discharge of electricity in the sky. This natural phenomenon is triggered in a cloud by a buildup of differing charges. A lightening flash is a sudden release of energy. It becomes a bright flare, usually followed by a loud thunderclap. Lightning can strike anywhere, and appears in a variety of guises. Which one you will see depends on your local atmospheric conditions. Avoid a confrontation, as a single lightening strike can carry millions of volts of electricity. A hit can be deadly.

Probability of Lightning Striking Your House

It is true that metal conducts electricity. However, metal roofs do not attract lightening. They do not increase your chances of getting hit either. Why? The following factors increase the probability of a strike:

  • Location: A house high up in the mountains or built on a hill has a higher chance of getting hit by lightening than one located on a flat field.
  • Dimensions: A high structure with a large cover is at a bigger risk than a low building with a small roof.
  • Neighboring buildings: Short structures near tall buildings are extremely safe.
  • Vicinity: Some regions are more affected by thunder and lightning storms than others.

Metal Construction Materials Are Safe

Metal is actually much safer than other roofing materials for the simple reason that it is noncombustible and does not explode. If a metal roof is struck by lightning, it is less likely to start a devastating fire. The electricity could spread throughout a large surface. That is not the case with asphalt shingles or wood.

Safety Guidelines

roofing contractor in Hillsborough, NC, explains to his customers that the safest place to be during a bad thunder and lightning storm is inside an enclosed building in an interior room. If they are outside, people should seek shelter in a vehicle and keep the windows closed. They should not touch any conductive paths to the outside.

How to Prevent Problems with Your Garage Door

What is the largest moving item in your home? More likely than not that item is your garage door. Most garage doors are about 16 feet across and 7 feet tall. They way around 100 pounds. If it fails to work, you may find yourself struggling to get in and out of your home. It can make it very difficult to get your cars in and out, too. If it’s not working properly, you may worry about the safety of your family and the security of your possessions. In order to keep everything working properly, there are certain things that you can do. This includes completing routine cleaning, conducting inspection, and calling professionals found by searching their home page. Learning about your role in maintaining your garage door can help you prevent any problems from arising.

Routine Cleaning

Most people fail to clean their garage door at all, but it should be cleaned every three to four months. Use a mild detergent and soap. Apply this to a brush to help work out the dirt and grime building on the various parts of your garage door. You can apply a light oil afterward to help keep it clean for as long as possible. During this time, you should also lubricate the hinges, tracks, and rollers. WD-40 or a similar product can help prevent things from becoming dry and difficult to move. This will keep things moving smoothly for as long as possible.

Conduct Inspection

You may not even notice your garage door equipment until you start to notice something wrong with it. You should try to conduct periodic inspections of the various parts. The hinges and chains are two parts that commonly have issues. If they look worn or damaged, you should have the parts replaced as soon as possible. If you don’t know how to do this on your own, contact someone who can help you. You should also check the weather stripping and caulk to make sure that there are no holes in the door, letting things into your garage.

Call Professionals

As you’re completing your own routine cleaning and conducting your own inspections, you should also consider calling a professional to come out to your home. He or she can inspect the parts as well. Since they have the knowledge and experience to identify potential problems, they can help make sure that you won’t have any issues arise in the near future. They can also check the remotes, power source, and safety features. You want to know that the door will go up if something or someone gets in the way of it. A professional can make sure that everything is in working order and will keep your family and possessions safe and secure.

If you have any questions or concerns about your garage door, you should seek a professional to come to your home and check it out for you. You can locate them by searching for their home page online.

Tips on How to Buy Perfect Lighting for Your House

Lighting has always been a concern for humans. Nobody wants to be in the dark at night. Buying ornate lamps and chandeliers is not a problem, as there are many different types for sale. However, finding the right solution is not always easy. To establish your choices, visit several stores in your neighborhood and talk to their staff, or complete extensive research online. Sites like offer visitors a wealth of valuable information. Lighting distributors also answer emails from concerned home and business owners. Here are some of the tips you can expect.

Foyers and Entrance Ways

Do you want to make a great first impression when someone enters your home or business? Opt for an impressive piece like a crystal chandelier. The size depends on the dimensions of the available space. A huge fixture would look out of place in a tiny room and vice versa. Stick to basic illumination for small hallways. Bring artwork and impressive wall decorations to life through halogen track lights or recessed lighting. These lamps should blend with the ceiling. Illumination in hallways and staircases is necessary for safety reasons. Lighting fixtures should be placed every 8 to 10 feet. General and accent lighting should all be the same in one room or from the same collection.

Room by Room

Choose fixtures based on the room type. Stylish living environments like dining rooms with high ceilings could be enhanced by a decorative ceiling-mounted fixture. Add wall sconces for intimate dinners or to emphasis precious paintings and prints. Kitchens can benefit from access lights, and many bedrooms in this country have ceiling fans with lights incorporated into the design. Do not forget that table lamps can also add charm and illumination to just about any room in the house. Overhead and track lighting are popular solutions for kitchens and bathrooms.

Stick to a Budget

Spend a little time researching which lighting solutions would look nice in your home. What are the dealers charging for these specific designs? Extravagant models and newer collections are usually more expensive. Make a list of all the rooms that need new fixtures. Calculate the total price. Are light bulbs included? Did you save enough? Keep in mind that you will also need to hire an electrician for the installation. Request quotes from several contractors in the area. Make sure that the same services are provided and the work is guaranteed. You could save a little by selling your old light fixtures. Some people do not mind used items, as long as they are in good working condition.

Select a Reputable Lighting Distributor

Not everyone selling light fixtures for residential and commercial customers offers extensive services. Looking for a paddle fan and ventilation system for your home or office? Explore your candidates’ websites to see what they are currently offering. For instance, you will notice different categories on Wholesale distributors offer a wide variety of options. They sell much more than electrical supplies and lighting fixtures.

How to Start the Process of Building a New Home

If you’re planning on building a new home in the next little while, you’re in for an exciting adventure. It’s easy to get caught up in the process, but in order to get what you want, you should follow a few important steps. While it’s important to secure a builder, for example, Lacrosse Homes in Maryland, that doesn’t have to be the first thing you do.

Find the Right Location

When you’re building a new home, you have several options available to you. It’s possible that you already have a builder in mind. Most builders have several subdivisions available where you can build your home. However, you can also purchase a lot in a different area, and they will build your house wherever you want it.

The advantage of utilizing a builder’s subdivision is that it may be easier to get financing for the land and the house. When you’re building on your own property, you will need to buy the property separately before you start building. Nevertheless, choosing the right location is important to ensure that you will love living there for many years to come.

Who Will Build Your Home?

Finding the right builder is just as important as finding the right location. There are a lot of builders that will build a home for you according to specified floor plans or custom-designed plans. If you’re anxious to move in quickly, a builder may already have a house ready to move in for you. Alternatively, you might find a home in the last building stages, which will still allow you to pick out the details.

When you’re talking to builders, you need to take a look at what they have already built. You want to make sure that they put quality first. For that purpose, you might want to talk to some of their customers. Finally, you need to discuss their floor plans and pricing with them. You don’t need to feel like you’re stuck with the existing floor plans, either. Usually, it’s not difficult to make small alterations.

What Should It Look Like?

It can take several weeks to decide what floor plan you would like best for your home. Choosing the floor plan is not the only thing you’ll have to decide on. Most builders will let you make a lot of choices, such as the type of siding, the type of flooring, the location of the windows, and the color of paint on your walls.

It’s really important to think about what you want. While you can easily alter the color of paint on your walls, it’s quite expensive to change out the kitchen cupboards. New homeowners also tend to try to save money by choosing carpet over hardwood floors, even though that’s not really their preferred choice. When it comes to flooring, it’s unlikely that you’ll switch it out later until it’s absolutely necessary. Therefore, you should get what you want in the first place.

What to Expect Next

Once your plans are finalized, you can sit back and relax. A reputable builder, such as Lacrosse Homes in Maryland, will take care of everything for you. Of course, you can go and visit your new home as it’s being built, but you don’t have to if you don’t want to. In the meantime, you might get busy with packing up your things.

The Components of a Clean Room

For those in the science and technology industries, few things are as important as a quality clean room. Many, if not most of the projects completed by these industries use equipment that is so sensitive that dust could destroy it. By installing clean rooms, these industries create an environment in which everything from humidity to airborne microbes can be controlled. While there are many options for clean room installation, few are as affordable, convenient, and offer the same high quality as modular clean rooms like those found at


A Plethora of Decisions

As you can probably imagine, clean rooms come with many different components. All of these, from the door to the ventilation system, are used to control the environment in which sensitive projects are worked on and completed. Without all the right components, it is almost impossible to be sure that clean rooms are clean enough for the work they contain. While there are many required components in the construction of a clean room, there are also many choices when it comes to the make and type of each of those components. One of the best parts about a company that offers modular clean rooms is that they can make designing the right clean room for your needs much easier than you would ever think possible. 


Deciding on a Door

As is the case with most rooms, the first part anyone will encounter is the door. While a door may seem like an easy enough concept, it is made infinitely trickier when the space on the other side is a clean room. Not only do the doors have to be functional when it comes to moving equipment and people in and out of them, they must also prevent harmful dust, humidity, and other small particles from entering the space; these are not doors you can pick up at your local home improvement store. When it comes to choosing the right door for your clean room, you won’t be disappointed in the selection you have to work with. Most companies offer swing doors, roll-up doors, and sliding doors all in a variety of materials that include glass, fiberglass, stainless steel, and even fabric. The decision about which doors are appropriate for your needs is best made by consulting with the designers who will create your clean room.


The All Important Pass-Thru


Maintaining the integrity of a clean room can be a nightmare. Not only are people constantly walking in and out of the space, equipment and things must also make the passage from the microbial cesspool of the outside world to the sanctity of the clean space. In order to assure that both the animate and inanimate are properly cleansed of their “out there” particles, it is wise to install a pass-thru. Pass-thrus are an easy-to-comprehend apparatus for anyone who has ever been to a butterfly house. In most cases, these attractions have a small room that blows air over everyone entering or exiting the house. This “air bath” is an effort to blow any hitchhiking butterflies off of their human vehicles and prevent them from entering the big wide world. In a clean room, the pass-thru blows off any particles that could lead to problems with the projects therein. 

For more information about the components of a clean room, visit

Ways to Entertain Your Kids in the Winter

Winter can be a tough time for parents, especially stay-at-home moms who are left with the task of keeping their kids entertained during the cold winter months. If you have children that are too young to go to school, this challenge is compounded. Bored and restless kids means tantrums from your toddlers and frustration on your part. The following article is here to help, as it offers a few ways to keep your kids entertained in the winter, like installing a pool after visiting

Ways to Entertain Your Kids in the Winter

Preschoolers can be especially difficult to handle if they become bored, and during the winter it is not as easy as it is during warmer months to keep your kids occupied. The following list may be able to help you out, though, as it offers stay-at-home moms a few ways to keep their kids entertained during the frigid winter months.

  • Go snowshoeing: There is no reason why you have to stay cooped up indoors during the winter. In fact, it is healthier for everyone in your household if they spend at least 30 minutes in the fresh air during the winter. This will help them to get fresh air and avoid catching sicknesses. Just make sure your kids are bundled up appropriately, and that you do not stay outside for too long. There are many activities you can do outside in the wintertime, and snowshoeing is one of the best. Snowshoeing can be done by kids three years old and up, and if you have children that are younger, you can pack them in a baby backpack or pull them in a sled. Snowshoeing is a great alternative after your kids have tired of building snowmen and sledding.
  • Paint in the snow: You can create your own “snow paint” with water and a little food coloring. Your kids will love this activity, and it costs next to nothing. Put the water and food coloring into bottles with a squeeze top, and you’re ready to go!
  • Organize a neighborhood playdate: A great way to get to know the moms in your area without having to find a babysitter is to organize a neighborhood playdate. Each mom can take turns hosting, and you can let the kids interact and get a little energy out while you enjoy the company of other grown-ups. Winter can feel like a lonely time of year, and so a weekly playdate is a great way to interact with others and stave off the feeling of isolation that may develop in the dead of winter.
  • Take them to a play place: There are multiple fast food chains that house play places for kids to run amok while you enjoy a Diet Coke. You can read a book while your kids burn off some energy.
  • Go swimming: While swimming may be commonly thought of as a summer activity, if you look around you can probably find several indoor swimming pools to take your kids to this winter. An even better alternative is using your own swimming pool from a company such as, or a friend or relatives’. Swimming is a great way to burn off energy, and you will love the long nap your kids take the afternoon after your swim. Just make sure that you avoid taking your kids out into the cool with wet hair by thoroughly drying them off and then putting a beanie on their head before you leave.

Reasons for Water Heater Repair

Nothing is as uncomfortable as getting into a hot shower on a cold winter’s morning and being met with icy, cold water. There could be any number of reasons why the water refuses to warm up, but many times it is a sure sign that there is something wrong with your water heater. The best way to solve the problem is to have your water heater inspected by a qualified San Francisco water heater repair company.


There are two types of tank water heaters: electric and gas. Both have a large holding tank filled with water and both types can experience problems with the heating element. Electric water heaters have a heating element in the tank that heats the water. The electric element can sometimes become corroded in the water or the wiring can break down causing a malfunction.

Gas water heaters have a flame underneath the tank that heats the walls of the tank and in turn heats the water. With a gas element, there may be a problem with the gas supply or, in some cases, soot and ash could be clogging the burners.


Water heater tanks are insulated to hold the heat in, but eventually the water will cool, especially when new water fills the tank. Inside the tank, there are two probes connected to thermostats. The bottom probe tells the system when it needs to heat the water up. The top probe maintains the temperature in the tank. As the water cools, the top probe tells the heating element when to raise the water temperature. As with the heating elements, the wiring on the sensors and the relays to the heating elements can be faulty or become corroded.


As water is heated, pressure begins to build in the tank. When the water is used, the pressure goes down until new water enters the tank and gets heated. If the water is not used right away, the pressure can continue to build. There is a pressure relief valve on the tank that automatically opens and lets out some pressure. Without this relief valve, the water heater could blow up, causing severe damage to your home and even causing bodily harm to members of the household.

The pressure relief valve should be checked regularly to make sure it is working properly. The valve can be opened by hand to hear the pressure escaping. If no pressure escapes, there may be a problem and you should call a plumber immediately.


No matter how clean your water may appear to be, there are still particles floating in it that get deposited inside the tank. Over time these particles settle at the bottom of the tank and interfere with the heating process, especially in a gas heater. Eventually, the buildup can push the sides out, breaking the seams and cause the water heater to leak. A yearly draining of the tank can flush these sediments out and prevent damage.

Maintenance Programs

Water heaters perform best when they are properly maintained. This is why many people take advantage of maintenance programs from companies that offer San Francisco water heater repair.

Maintaining Your Air Conditioning Unit

Wouldn’t it be nice if all of the necessary maintenance in the home could be performed with a simple press of a “click here” button? Of course, if you put your credit card information in first, that dream could become a reality, but for those people who are on a budget, much of the maintenance in the average home must be performed by the homeowner; because, if it isn’t done, it will be far more expensive to replace the broken or worn-out system or materials than paying someone to do the maintenance in the first place. One example of this principle is the regular yearly preparation of the air conditioning unit before turning it on for the first time.


How to Perform Your Own Maintenance on the AC Unit


Once a year, before you switch on the AC unit for the first time that year, you should always do a few things to make sure it runs at optimal proficiency. While there are companies that specialize in doing this sort of work for a nominal price, you may want to take the time to do them yourself as they are not too difficult.

  1. First, clear away any greenery that has grown around or into the air conditioning unit. Vines are especially good at infiltrating the unit as they can twist and grow through the vents.
  2. Once the greenery has gone, clean off any other debris that has gathered into and around the unit. This debris usually consists of wind-blown leaves from last fall, or fallen matter from overhanging trees and shrubs.
  3.  Once the external debris has been removed, it is time to deal with any debris that has made it inside the unit. Remove the top of the unit, and clean out any debris with a shop-vac, wiping the fans clean and pulling out any other greenery that has penetrated through the vent openings.
  4. Use the shop-vac to suck out the dust from between the cooling fins, then use a fin comb (purchased at your local hardware store) to carefully straighten out any bent fins.
  5. Finally, make sure that the coolant line isn’t iced over, damaged, or broken in any way. If the coolant line is damaged, you will need the help of a professional.

While you don’t have the “click here” button, performing this simple maintenance one a year can help keep your AC unit running efficiently for years.

Beat the Heat and Stay Cool This Summer

Staying cool on a hot summer’s day can be a real challenge. In the days when climate control was a matter of science fiction, overheated homeowners served cold beverages to guests as refreshment. Others ran to nearby bodies of water for a quick swim. Today, the dog days of summer aren’t nearly such a challenge to survive. Air conditioning units have become part of everyday life during the hot months. Swamp coolers, window mounted refrigeration units, and even central air all provide a relaxing home environment, no matter how hot it gets outside. While some A/C options are more efficient than others, each performs its respective duty based on the needs of those who use them. For smaller apartments and homes, window mounted units are perfectly acceptable, pushing cold, refreshing air throughout the residence with ease and efficiency. Large public buildings such as shopping malls or schools require a much more industrialized approach to climate change. No matter what your cooling needs are, there is a system that can be custom designed to fit your specific requirements. If you’re interested in changing or upgrading your air conditioning in Georgetown, then you should make an appointment with a local A/C tech to discuss your options.


Humidity is something that fluctuates with the presence of specific, seasonal weather patterns. There are, however, some places on earth where humidity is present no matter the time of year. The southeastern United States, for example, experiences some of the most extreme amounts of air humidity and barometric pressure on the planet. The challenge that this poses for those who want to cool down on a hot day is exceptional. Humidity is, quite literally, vaporized water particles that hang in the air. These tiny molecules not only transfer heat from the sun more efficiently, but they magnify it, making it more intense. Because the water particles cannot be removed from the air, it can render home A/C units ineffective against intense heat waves. The swamp cooler, an invention designed to combat air humidity, made a splash in the early 1960’s with its simple, yet innovative design. It’s comprised of a large metal housing loaded with foam padding. A dedicated water line drenches the padding in cold water before the device is activated. Within the housing, a large circular fan, resembling that of a hamster wheel, spins at high speeds, causing a vacuum type effect. Air is drawn through the water-soaked padding and forced into the home. The device is effectively used by millions of residents worldwide to combat, hot, humid air.

Stay Cool

The only thing worse than not having A/C during the summer is putting up with an old, rusty system that no longer functions. This summer beat the heat by installing a new A/C system that will keep you feeling ice cold as the sun shows off its fury. Before you upgrade or get work done on your current units, make sure to call a technician who knows air conditioning in Georgetown for information about your options.

Before You Hire a Swimming Pool Builder

Having your own swimming pool is certainly a great luxury for any homeowner. It allows you the opportunity to work out or have fun in the privacy of your own yard. You can also invite friends and family to a pool party, where you provide the pool and they throw the party. But before you run off and hire a swimming pool builder in Minneapolis, there are a few more things to think about when owning a pool.

A Pool Requires Regular Maintenance

While a pool is fun to have and share with friends, it does have some drawbacks. For example, a swimming pool requires regular maintenance. If you don’t keep the chemical levels just right, there will be problems. Unfortunately, the chemicals don’t balance themselves.

A pool also has to be cleaned out regularly. You have to get leaves out in the fall, and you’ll have to cover it up during the winter. The good news about pool maintenance is that you don’t have to do it yourself. While it is a lot of work, you can hire someone else to do it. That means all you have to worry about is the cost of the maintenance, not the time it will take you.

Pools Can Be Expensive

Getting a blow-up pool is cheap. While they usually don’t last for more than one summer, and you’re lucky if they don’t break beforehand, they’re fairly inexpensive. However, a real pool would allow you to go swimming, too, and not just your kids. But obviously, it’s going to present quite an investment of money.

You’ll have to hire a pool builder to get it built for you. You’ll also have to be prepared to spend money on repairs and maintenance over the years. Occasionally, you’ll have to replace a pump or other equipment. But if that doesn’t deter you, then you’re ready for the positive aspects of owning a pool.

Ready to Hire a Builder?

Even though pools are expensive, they can actually increase the value of your home, making it a good investment. Your swimming pool builder in Minneapolis can build just the right pool for you, and this is where the fun begins. Your pool doesn’t have to be rectangular, and your tiles don’t have to be blue. You can get a pool custom-built just for you. And you can design your landscaping to add to the beauty of your pool.